EVE-NG: Committing / Saving Qemu Virtual Machine Settings
KB ID 0001695 Problem I’ve been working on a load balancing lab in EVE-NG this last week or so. I created some web servers (in TinyCore Linux,) to act as the web servers in that lab. (Essentially they serve a different colour web page so I can test the load balancing is working OK). Now I wanted to save the changes I made so that I could redeploy the configured servers to multiple labs. But when you deploy a qemu VM as a node in...
GNS3 – Initial Setup, Adding Routers, Hosts, and ASA Firewalls
KB ID 0000927 NOTE: THIS ARTICLE IS FOR THE OLD VERSION OF GNS3 GO HERE FOR THE NEW ONE Problem I dip into GNS3 every so often, (depending on what I’m working on). And each time I install it, I spend just as long remembering how to set it up, as I do using it! So, if for no other reason than I can use this page as a reference in future, here’s how to get it up and running. Solution Note: At time of writing he latest...
GNS3 – Initial Setup, Adding Routers, Hosts, and ASA Firewalls
KB ID 0001079 Problem I dip into GNS3 every so often, (depending on what I’m working on). And each time I install it, I spend just as long remembering how to set it up, as I do using it! So, if for no other reason than I can use this page as a reference in future, here’s how to get it up and running.</p? Solution Note: At time of writing the latest version is 1.3.6</p? 1. Download GNS3, I usually accept all the...