VPN no DNS KB ID 0001402
Problem
I’ve been setting up a VPN solution on the test bench as I’m looking at Always On VPN. When I noticed that I had a problem with my remote VPN connections on Windows. They would connect fine but I could not resolve any FQDNs for my domain?
VPN no DNS Solution
By default, all (Windows) VPN connections are ‘Force Tunnel’ (this means they have the option ‘Use default gateway on remote network’ selected). This also means that, (unless your RAS server is the default Gateway for your network,) you usually don’t have internet access when connected to the VPN.
Now I connected fine, and I could ping IP addresses on my corporate network, but I could not ping my servers by their domain name, in fact Windows was trying to resolve my domain name to a public IP?
Google this problem and you’re simply told to ‘Disable IPv6 on your network card, and this works, (if you want to keep your remote users Force-Tunnelled). But disabling IPv6 is hardly a fix is it?
Also If you want internet access for your remote clients, (Commonly referred to as ‘Split Tunnel’), then even with IPv6 disabled, the problem comes back!
Why is this happening? Well even with Force Tunnel enabled, you can still use your local LAN (Connect to your VPN, and ping your home gateway, or printer or wireless access point if you don’t believe me!) This connection takes precedence over your remote VPN connection, to prove it run a netstat -rn command.
From the above you can see my Ethernet Adaptor has a metric of 6, and my VPN connector, (in this case called Connection Template) has metric of 23. AND THE LOWEST ONE WINS, so your DNS queries are going out of your local internet connection NOT down the VPN tunnel!
How Do I Fix this VPN no DNS?
Well until Microsoft fixes this in Windows 10, (it’s fine on Windows 8 and earlier), you have to manipulate the metrics yourself, like so;
VPN no DNS On Your Physical Adapter;
Start > ncpa.cpl {enter} > Right click your NIC > Properties > Internet Protocol Version 4 > Properties.
Advanced > Untick ‘Automatic Metric’ > Set the Interface Metric to 20 > OK > OK >OK.
On Your VPN Connector;
Start > ncpa.cpl {enter} > Right click your VPN Connector > Properties > Internet Protocol Version 4 > Properties.
Advanced > Untick ‘Automatic Metric’ > Set the Interface Metric to 10 > OK > OK >OK.
Now your DNS look-ups should behave!
Related Articles, References, Credits, or External Links
NA