KB ID 0001673
Background
This page will be used as a central repository and ‘index’ for configuration on the Cisco Firepower 1010 series firewall. I intend to add to it as I test the capabilities and work out any problems whilst trialing/deploying and operating this platform.
Config Documents
VPN Firepower 1000 series running ASA Code.
General
Cisco Firepower 1010 Licensing
VPN
EZVPN
Is not supported on this platform, it cannot be configured as an EZVPN client.
Site to Site VPN (as per older 5500-x and 5500 series)
Cisco ASA Site To Site VPN IKEv2 “Using CLI”
Cisco ASA Site To Site VPN IKEv1 “Using CLI” (Only normally required, if the other end does not support IKEv2)
Cisco ASA Site to Site VPN ‘Using ASDM’
Remote Access VPN
Cisco ASA AnyConnect VPN ‘Using CLI’
Cisco ASA AnyConnect VPN ‘Using ASDM’
Cisco ASA – L2TP over IPSEC VPN ‘Using CLI or ASDM’ (Using Windows 10 Built in VPN client)
Port Forwarding and NAT
Cisco ASA Port Forwarding ‘Using CLI or ASDM’
Cisco ASA Port Forwarding To A Different Port
Cisco ASA Port Forwarding a ‘Range of Ports’
Cisco ASA Static (One to One) NAT Translation
VPN Firepower 1000 series running FTD Code.
General
Cisco Firepower 1010 (FTD) Initial Setup
Cisco FTD: AMP/URL Filtering/Threat Detection and AVC
VPN
Site to Site VPN
Remote Access VPN
Cisco FTD Remote Access VPN (AnyConnect)
Cisco FTD (and ASA) Creating AnyConnect Profiles
I will continue to add to this page but please be patient. (I’m juggling two jobs, and have a personal life!)
Related Articles, References, Credits, or External Links
NA