Cisco ASA Site To Site VPN IKEv1 “Using CLI”
Do the same from ASDM KB ID 0000050 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Note: This is quite an OLD POST, only use these instructions if you need to create a VPN tunnel that uses IKEv1, (i.e. The other end is not a Cisco ASA, or it’s a Cisco ASA running code older than 8.4). You can still use an IKEv1 tunnel of course, so this article is still valid, it’s just...