Exchange – “This operation can only be performed by a manager of the group” Error
KB ID 0000603 Problem Seen On Exchange 2010 (SP1), when trying to add a user to a distribution group. Add-DistributionGroupMember Failed Error: You don’t have sufficient permissions. This operation can only be performed by a manager of the group. Solution 1. There a few reasons for this error, I’m assuming that there is no user set as the manager for this group? (Properties > Group Information > Managed By). In my...
Granting Users Password Change Ability (Password Administration)
KB ID 0000503 Problem This is a two part operation, firstly you need to give the user(s) the rights to change passwords, then give them the tools to do so. Solution Step 1: Grant the rights (Delegation of Control) 1. Whilst logged into a domain controller with administrative access, open “Active Directory Users and Computers” and create a group that you are going to allow password reset rights to. Note: In this example...
Cisco ASA Site to Site VPN’sSite to Site ISAKMP VPN (Main Mode)
KB ID 0000213 Problem As with most things, before you have a hope of fixing something, you will stand a better chance if you know how it works in the first place. Below is a quick run though of what’s happening with your site to site VPN’s and how they work. For the entire process we will have two Cisco ASA 5500 firewalls and a site to site VPN. Solution What’s an Initiator and a Responder? 1. Our Laptop 192.168.1.50...