Windows – Remove the Username (Personal Folder) From the Start Menu
KB ID 0000398 Problem Normal users probably won’t care, but if you’re in a corporate environment or a school for example, you might not want your users having access to the personal folder in their Start Menu. The video below runs though how to remove this option on a single machine and how to remove it with Group Policy Preferences (GPP). Solution Related Articles, References, Credits, or External Links Group...
McAfee ePO – Client Firewall Exceptions to Allow Agent Deployment
KB ID 0000952 Problem It’s been a while, since I deployed ePO, and as I’ve got a big McAfee roll-out coming up I thought I’d better run it up on the test bench and see how much it’s changed since version 4. As the prospective client is going to use Server 2012 and Windows 8, that’s what I tested it with. Despite my best efforts the the McAfee agent (8.6) refused to deploy to the clients as long as I had...
Cisco ISE – Basic 802.1x With WindowsPart Four – Configuring The Windows Clients (Supplicants)
KB ID 0001083 Problem Back in Part Three we setup the switches ready to plug in our clients. I’m going to configure the Windows clients by Group Policy. But I suggest you carry out tests using single Windows clients and LOCAL policy until you know you have everything setup correctly. WARNING: Rolling this out without adequate testing, can resolve in all your Windows clients falling off the network Solution 1. On a DC or a...
Cisco AnyConnect – Securing with Microsoft Certificate Services
Part 1 (How to Configure Microsoft Certificate Services for AnyConnect) KB ID 0001030 Problem I’ve done a lot of AnyConnect deployments, and I’ve even done them with certificates in the past. I’ve seen plenty of articles and blogs that say ‘It would be better to use a PKI deployment like Microsoft Certificate Services’, but there’s very little info out there on how to set it up. I have a client...
AnyConnect – Using a Windows DHCP Server to Lease IP Addresses to the Remote Clients
KB ID 0001050 Problem I did an AnyConnect design for a client recently, and they asked ‘Instead of using the firewall to lease the DHCP addresses to our remote clients, can we use our Windows DHCP Server?” In the past I’ve used Windows DHCP servers for IPSEC VPN clients, but more recently I’ve tended to just use the firewall. The client had some valid reasons for wanting to do so, and given the complexity of...