Windows Server 2012 – Deploying SSTP VPNs
KB ID 0000819 Problem SSTP gives you the ability to connect to your corporate network from any location that has an internet connection, and is not filtering https. This port is usually open for normal secure web traffic. Traditional VPN connections require ports and protocols to be open for them to work, which makes a solution that runs over TCP port 443 attractive. Thoughts: While I can see why this is a good idea, Microsoft has...
Direct Access – Error While Running The Remote Access Wizard
KB ID 0000839 Problem Seen on Windows Server 2012, when configuring direct access, while running the ‘Getting Started Wizard’ you have to choose the network topology. You have a choice of edge, behind an edge device (with 1 NIC), or behind an edge device (with 2 NICs). Each choice you make will present you with one of the following errors. An external adapter with a public IP address, IPv6 enabled and without a domain...
Server 2008 R2 – Inbound traffic Blocked – Outbound Traffic works?
KB ID 0000397 Problem My colleague had this problem this week, and it involved a call to Microsoft to resolve. Basically the client had some comms problems, so ran Windows updates, post update the server (which was the main domain controller and DHCP server for the network) could not be seen by any clients on the network. The server itself however could quite happily see everything else. Solution The problem is due to the Windows...
Windows Server 2008 R2 – Configure RADIUS for Cisco ASA 5500 Authentication
KB ID 0000688 Problem Last week I was configuring some 2008 R2 RADIUS authentication, for authenticating remote VPN clients to a Cisco ASA Firewall. I will say that Kerberos Authentication is a LOT easier to configure, so you might want to check that first. Solution Step 1 Configure the ASA for AAA RADIUS Authentication 1. Connect to your ASDM, > Configuration > Remote Access VPN. > AAA Local Users > AAA Server Groups. 2....
Install SCCM 2007 on Windows Server 2008 R2 – Step by Step
KB ID 0000297 Problem I had to work out how to do this for a client, and as is my modus operandi, I’ll try and save you some of the pain I endured, Products Used System Center Configuration Manager 2007 SP2 Windows Server 2008 R2 SQL 2008 R2 (At time of writing neither officially supported or not supported on SCCM) Note: I was originally going to use SQL 2005 – hence the reason the SQL servers name is SCCM-SQL2005, however...