Cisco Router – Configure NAT (NAT Overload)
NAT Overload KB ID 0000971 Problem NAT is the process of taking one or more IP addresses and translating it/them into different IP addresses. You may require your router to translate all your internal IP addresses to your public (ISP allocated) IP address. To do that we use a process called NAT Overload. Solution : Nat Overload 1. Connect to the router, and got to enable mode, then global configuration mode. PetesRouter#configure...
HP and Cisco – VLANs and Trunks Confusion!
KB ID 0000741 Problem When I first started in IT, I went and did my Cisco CCNA. So I learned that to connect Cisco switches and pass VLAN traffic between them, I needed to create a ‘Trunk’ to pass the VLAN traffic. Fast forward a few years, and I now work for an HP reseller. Very early on I came to realise that what HP called a ‘trunk’ was very different from what I had been taught. Below is an article I did a...
Cisco AnyConnect – Essentials / Premium Licenses. Explained
KB ID 0000628 Problem Note: With Anyconnect 4 Cisco now use Plus and Apex AnyConnect licensing. When Cisco released the 8.2 version of the ASA code, they changed their licensing model for AnyConnect Licenses. There are two licensing models, Premium and Essentials. Solution Cisco ASA AnyConnect Premium Licenses. You get two of these free with your firewall*, with a ‘Premium License’ you can use the AnyConnect client...