Cisco ASA Site to Site VPN ‘Using ASDM’
KB ID 0000072 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Do the same from command line Below is a walk-through for setting up one end of a site to site VPN Tunnel using a Cisco ASA appliance – Via the ASDM console. Though if (like me) you prefer using the Command Line Interface I’ve put the commands at the end. click image for full subnet information Solution VPN Setup...
Cisco ASA Site to Site VPN’sSite to Site ISAKMP VPN (Main Mode)
KB ID 0000213 Problem As with most things, before you have a hope of fixing something, you will stand a better chance if you know how it works in the first place. Below is a quick run though of what’s happening with your site to site VPN’s and how they work. For the entire process we will have two Cisco ASA 5500 firewalls and a site to site VPN. Solution What’s an Initiator and a Responder? 1. Our Laptop 192.168.1.50...
Troubleshooting Phase 1 Cisco Site to Site (L2L) VPN Tunnels
KB ID 0000216 Problem Site to Site VPN’s either work faultlessly straight away, or involve head scratching and a call to Cisco TAC, or someone like me to come and take a look. If I’m honest, the simplest and best answer to the problem is “Remove the Tunnel from both ends and put it back again”. Just about every VPN tunnel I’ve put in that did not work, was a result of my fat fingers putting in the wrong...