Cisco AnyConnect – Allow Domain Password Change via LDAP
KB ID 0001273 Problem If you have remote users who connect via VPN, and a policy that forces them to change their password periodically, this can result in them getting locked out without the ability to change their password (externally). If your Cisco ASA is using LDAP to authenticate your users, then you can use your remote AnyConnect VPN solution to let them reset their passwords remotely. Solution Standard LDAP runs over TCP...
Cisco ASA – Remote IPSEC VPN With the NCP Entry Client
KB ID 0001260 Problem I’ve covered Cisco IPSEC Remote VPNs a long time ago, and I’ve also blogged about the Cisco IPSEC VPN Client Software. Yes you can get the Cisco VPN Client Working on Windows 10, but can you imagine rolling that out to a few hundred users? The bottom line is Remote Cisco IPSEC VPN is a dead technology, Cisco, (and Me!) want you to use AnyConnect. For a couple of users you can use the work arounds...
Cisco IOS – How To Find VLAN IPs (SVI’s)
KB ID 0001258 Problem If you have a complicated network, you can spend more time finding out how it’s configured, than actually doing any work on it! Today I had a client that needed some changes made on their LAN, I knew their name, and their network address, and common sense told me which of the core switches they were connected to. Solution A quick search on the client name told me what VRF they were in, and what VLAN they...
MAC TFTP Software (OS X )
Mac TFTP KB ID 0001247 Problem Every time I go to a networking event theres a sea of MacBooks in the audience, If techs like MacBooks so much why is there such a lack of decent Mac TFTP software? Solution The thing is, I’m looking at the problem with my ‘Windows User’ head on. When I have a task to perform I’m geared towards looking for a program do do that for me. OS X is Linux (There I said it!) Linux in a...
Cisco IOS ‘Crypto’ Unrecognized Command?
KB ID 0001246 Problem I was working on a Cisco 3750-G last week, and I was in the process of setting up SSH access. When I went to generate the crypto key and enable SSH, It fired an error at me. In fact it wouldn’t execute any crypto commands; Core-SW(config)#crypto ? % Unrecognized command Now I have seen this before, (but not for a while). You need to be running a K9 version of the code. A quick ‘show version’...