Upgrade Cisco PIX 515E to Version 8.0(4)
and ASDM version 6.1(5) KB ID 0000424 Problem I had to update a Cisco PIX 515E last week, Cisco 500 firewalls are a bit thin on the ground these days, and most of my corporate clients have replaced then with Cisco ASA 5500 firewalls. So as these units are now getting retired, or moved to the test bench, or sold on ebay. I thought I’d document probably the last one I did for posterity, and to help anyone else out. Note: Cisco...
Allow access to VMware View through Cisco ASA 5500
KB ID 0000545 Problem To access VMware View though a firewall you need the following ports to be open; TCP Port 80 (http/www) TCP Port 443 (https/ssl) TCP Port 4172 (PCoIP) UDP Port 4172 (PCoIP) In the following example I’m using 192.168.1.100 as the internal IP address of the View Server and the public IP address of the firewall is 123.123.123.123. Which solution you use, depends on weather you are allowing access via a...
Update Cisco ASA – Directly from Cisco (via ASDM)
KB ID 0000636 Problem Warning: Before upgrading/updating the ASA to version 8.3 (or Higher) Check to see if you have the correct amount of RAM in the firewall (“show version” command will tell you). This is VERYIMPORTANT if your ASA was shipped before February 2010. See the link below for more information. ASA – Memory Error (Post upgrade to version 8.3) Warning 2: Be aware, if you are upgrading to an OS of...
Cisco ASA 5500 – Using a Third Party Digital Certificate
(For Identification, AnyConnect, and SSL VPN) KB ID 0000694 Problem A client asked me how to do this, so off I went to the test bench to work it out. Note: I’m this example In going to submit the request to, and issue the certificate from, my own windows domain certificate authority, you would send your request to a third party certificate authority, here’s a direct link to the certificate type you require. To use your own...
Cisco ASA to Juniper SRX Site to Site VPN
KB ID 0000710 Problem You want to establish a site to site VPN from a site with a Cisco ASA firewall, to another site running a Juniper SRX firewall. I had to do this this week, and struggled to find any good information to help. In the example below I’m configuring the whole thing from a laptop (172.16.254.206) that’s on the Juniper’s site. Use the diagram below, and substitute your own IP addresses and subnet...