Cisco Firepower 1010 Configuration
KB ID 0001673 Background This page will be used as a central repository and ‘index’ for configuration on the Cisco Firepower 1010 series firewall. I intend to add to it as I test the capabilities and work out any problems whilst trialing/deploying and operating this platform. Config Documents VPN Firepower 1000 series running ASA Code. General Cisco Firepower 1010 Licensing Reimage Cisco 1010 ASA to FTD VPN EZVPN Is not...
Get Free Cisco AnyConnect Licences For COVID-19 Homeworkers
KB ID 0001661 Problem Cisco released information on their blog a few days ago to say that they would be offering free Umbrella, Duo and AnyConnect Licences to customers in the wake of the the COVID-19 outbreak. Thats great news, but there’s no information on how to get the AnyConnect licences. It just says speak to your Cisco partner. As I am a Cisco partner I was confused, and it seems my colleagues were also. So I contacted...
AnyConnect: Enable Duo 2Factor Authentication
KB ID 0001650 Problem I was asked if I’d ever set this up the other week. Surprisingly I had not, I’d deployed Duo for other things, but not for Cisco AnyConnect. As I had some other ‘Duo’ related tasks coming up, I was deploying it on the test bench, then adding in my Cisco ASA and AnyConnect wasn’t much more work! Here’s my topology; My ASA is running version 9.1 My Duo Authentication Proxy is...
Cisco ASA AnyConnect VPN ‘Using ASDM’
KB ID 0000069 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco Firepower devices running ASA Code. Below is a walk through for setting up a client to gateway VPN Tunnel using a Cisco Firepower ASA appliance. This was done via the ASDM console. The video was shot with ASA version 9.13(1) and ASDM 7.13(1). Suggestion: If you are setting this up for the first time, I would suggest setting it up to use the ASA’s LOCAL...
Cisco ASA AnyConnect VPN ‘Using CLI’
KB ID 0000943 Problem Note: This is for Cisco ASA 5500, 5500-x, and Cisco FTD running ASA Code. Also See Cisco ASA AnyConnect VPN ‘Using ASDM’ This procedure was done on Cisco ASA (post) version 8.4, so it uses all the newer NAT commands. I’m also going to use self signed certificates so you will see this error when you attempt to connect. Solution 1. The first job is to go get the AnyConnect client package(s),...