Microsoft – NDES Site Shows ‘HTTP Error 500.0 – Internal Server Error’
KB ID 0001181 Problem I was doing some testing for a client this week, a while ago I had deployed a three tier PKI solution for them, and as part of the rollout we deployed NDES for their network devices, (they were going to use certificates to secure site to site VPNs). The client was concerned, and wanted the auto renewal process testing. This could not be done on the live system. So myself and a colleague went to the test bench, I...
Exchange – ‘Not all the required authentication methods were found’
KB ID 0001180 Problem I had to visit a client who had recently gone through an Exchange migration, now his external mail clients were having a nightmare staying connected to Outlook Anywhere. I ran the Exchange connectivity tester and got this; Additional details Not all the required authentication methods were found Methods Found: Basic Methods Required: NTLM Solution Looks like an open and shut case, someone forgot to enable...
Cisco Add FirePOWER Module to FirePOWER Management Center
KB ID 0001178 Problem If you only have one FirePOWER service module you can now manage it from the ASDM; ASA 5505-X / 5508-X Setup FirePOWER Services (for ASDM) But if you have got more than one, and you can manage them centrally with the FirePOWER Management Center, (formally SourceFIRE Defence Center). WARNING: If you are going to use FMC DON’T register your licences in the ASDM, they all need to be registered in the FMC. ...
Cisco – Testing AAA Authentication (Cisco ASA and IOS)
KB ID 0001175 Problem I always forget the syntax for this, and I’ve been meaning to publish this for a while so here you go. If you have AAA setup and people can’t log in, then the ability to test authentication against a user’s username and password is a good troubleshooting step! Usually I’m on a Cisco ASA but I’ll tag on the syntax for IOS as well. Solution Cisco ASA Test AAA Authentication From...
Windows Server – Change a DHCP Scopes Subnet Mask
KB ID 0001177 Problem You have probably tried to do this and found he option ‘greyed out’ because in the DHCP management console you can’t change the subnet mask of a scope. I needed to change a clients DHCP scope because I was changing their subnet from /24 to /16. I could have simply deleted and recreated the scope, but they has a lot of custom settings for their phone system, and hundreds of reservations (which...