Cisco SFR Session – Cannot Exit To Command Line
KB ID 0001259 Problem This tripped me up once before, and I didn’t document it! Normally if you have a console session open with your FirePOWER Module, (that you opened with a ‘session sfr’ command), then you can just quit, and exit back to the firewall by typing ‘exit’, like so; ciscoasa# session sfr Opening command session with module sfr. Connected to module sfr. Escape character sequence is...
Cisco IOS – How To Find VLAN IPs (SVI’s)
KB ID 0001258 Problem If you have a complicated network, you can spend more time finding out how it’s configured, than actually doing any work on it! Today I had a client that needed some changes made on their LAN, I knew their name, and their network address, and common sense told me which of the core switches they were connected to. Solution A quick search on the client name told me what VRF they were in, and what VLAN they...
Windows Server – Locating, Transferring, and Seizing FSMO Roles
FSMO Roles KB ID 0001257 Problem I’ve written about transferring and sizing FSMO roles, (Flexible Single Master Operations) before, see the following article; Transferring Your FSMO Roles Now you have a PowerShell Commandlet to help ‘Move-ADDirectoryServerOperationMasterRole’. FSMO Roles : Solution As before you can view your FSMO role holders, by using the following command. netdom query fsmo To transfer them to...
Cisco AnyConnect – With Google Authenticator 2 Factor Authentication
KB ID 0001256 Problem This was asked as a question on Experts Exchange this week, and it got my interest. A quick search turned up a bunch of posts that said, yes this is possible, and you deploy it with FreeRADIUS and it works great. The problem was, a lot of the information is a little out of date, and some of it is ‘wrong enough’ to make the non-technical types give up. But I persevered, and got it to work. Disclaimer:...
Meraki To Cisco ASA 5500 Site to Site VPN
KB ID 0001255 Problem This was surprisingly easier than I was expecting! Special thanks to Steve for letting me loose on his test network for the Meraki end of the tunnel. Here I’m using an MX 64 Security appliance, and a Cisco ASA 5510. Note: The Meraki device will need a static IP. Solution Configuring Meraki MX Device for VPN to a Cisco ASA From your Meraki dashboard > Security Appliance > Site To Site VPN. If you...