KB ID 0001259
This tripped me up once before, and I didn’t document it! Normally if you have a console session open with your FirePOWER Module, (that you opened with a ‘session sfr‘ command), then you can just quit, and exit back to the firewall by typing ‘exit‘, like so;
ciscoasa# session sfr Opening command session with module sfr. Connected to module sfr. Escape character sequence is 'CTRL-^X'. Cisco ASA5512 v6.1.0 (build 330) firepower login: admin Password:****** Last login: Tue Nov 22 15:49:51 UTC 2016 on pts/0 > exit Remote card closed command session. Press any key to continue. Command session with module sfr terminated. ciscoasa#
But if you have a console session open with the module, (that you opened with a ‘session sfr console‘ command), then typing exit simply dumps you back at the login screen!
ciscoasa(config)# session sfr console asasfr-boot>exit Cisco FirePOWER Services Boot Image 6.1.0 asasfr login:
Well that’s annoying! You need to log back into the SFR module, then exit with the following key sequence;
Then release those keys and press ‘x‘
Related Articles, References, Credits, or External Links