GNS3 – Assign an IP Address to Linux Microcore QEMU Guest

KB ID 0000932 Dtd 31/03/14

Problem

The whole point of having these guest machines is for testing communications, putting an IP address on them so you can ping things, is a pretty basic step.

Solution

1. Console in, and execute the following commands, obviously change the IP addresses to the ones you require.

sudo su
ifconfig eth0 10.10.10.10 netmask 255.0.0.0 up
route add ip default gw 10.10.10.1
route add default gw 10.10.10.1

Add IP to Microcore

Related Articles, References, Credits, or External Links

NA

Author: Migrated

Share This Post On