Seen on ESX installed on HP Proliant DL380 G5, on the normal ESX console screen.

1. Reboot the server and Press F9 to enter the RBSU.

2. Advanced > Processor Options > No-Execute Memory Protection > Enabled.

If this post helped you, PLEASE take the time to +1 it.

Please be aware, all information is provided free, but it does cost me to have this site hosted, if I've helped you in any way, or saved you some time/cost please take time to make a donation.

If you have anything to add to an article, or have an article you would like us to publish please feel free to contact PeteNetLive. (Please be aware I get a LOT of email, I cannot assist and fix everyone's problems, please do not be offended if you do not get a response).