PeteNetLive - KB0000267 - Event ID 7518

0000267

Dated

01/06/10

Revision

0.01

Event ID 7518

Problem

Event ID 7518

Solution

Sender Id must be configured with a list of trusted mail servers before it can be enabled

Cause:
You have enabled Sender ID filtering on your "Virtual SMTP Server." Like so,

Fix:
You need to add your internal IP range and the PUBLIC ip address of the Exchange server.

1. Open Exchange System Manager > Global Settings > Message Delivery > Right Click > Properties > General > Add > Add.

2. Add in your local IP scope AND the public IP of the Exchange Server > OK.

Comments:

If this post helped you, PLEASE take the time to +1 it.

Please be aware, all information is provided free, but it does cost me to have this site hosted, if I've helped you in any way, or saved you some time/cost please take time to make a donation.

If you have anything to add to an article, or have an article you would like us to publish please feel free to contact PeteNetLive. (Please be aware I get a LOT of email, I cannot assist and fix everyone's problems, please do not be offended if you do not get a response).

References - Credits - Or External Links