1. OK, so I've got my graphic, and I know something about it thats not obvious at first glance.

2. So I'll open it with Photoshop and put an arrow on it. Firstly Select the "Line tool".

3. On the toolbar at the top select the drop down arrow next to the free form tool > And tick the Arrowheads "End" box. Note: for a larger line/arrow width, change the weight from 1px (pixel).

4. Click and drag on the graphic where you want the arrow to start and stop.

Yes that's correct this girls nose and mouth are on upside down, did you spot that originally?

If this post helped you, PLEASE take the time to +1 it.

Please be aware, all information is provided free, but it does cost me to have this site hosted, if I've helped you in any way, or saved you some time/cost please take time to make a donation.

If you have anything to add to an article, or have an article you would like us to publish please feel free to contact PeteNetLive. (Please be aware I get a LOT of email, I cannot assist and fix everyone's problems, please do not be offended if you do not get a response).