Change Hosts / Connection / Screens on a Belkin Omniview KVM Switch

KB ID 0000194 Dtd 03/03/10

Problem

You are stood in the server room looking like a muppet, because you can’t switch between servers on the Belkin KVM switch, and even though the HP/Fujitsu KVM switches all work with [Print Scrn], these don’t. And putting a model number or something on the exposed part of the KVM so you could Google it and get a handbook would have been far too hard.

Solution

You need to Press Scroll Lock TWICE {it should beep} quickly followed by either the up and down cursor keys, or Scroll Lock TWICE {it should beep} quickly followed by "0" to cycle through the connected machines.

Related Articles, References, Credits, or External Links

NA

Author: Migrated

Share This Post On