Notes:

Software Download Links

Qemu with ASA
Dynamips
WinPcap

Sample Batch File

@echo off
ECHO Telnet to 127.0.0.1 on port 1234 to access ASA Console
ECHO -------------------------------------------------------
ECHO * * * * * * *DO NOT CLOSE THIS WINDOWS* * * * * * * *
qemupcap -L . -hda FLASH1 -hdachs 980,16,32 -kernel vmlinuz -initrd asa-nolina.gz -m 256 --no-kqemu -append "auto nousb ide1=noprobe bigphysarea=16384 console=ttyS0,9600n8 hda=980,16,32" -net nic,vlan=0,model=pcnet,macaddr=00:aa:00:00:01:01 -net pcap,vlan=0,ifname=\Device\NPF_{120662E6-8B8B-4A6D-A0B1-9159DBD283BA} -net nic,vlan=1,model=pcnet,macaddr=00:aa:00:00:01:02 -net pcap,vlan=1,ifname=\Device\NPF_{BF1F38D4-5D13-4DA2-B50B-17B1F35B1FA8} -net nic,vlan=2,model=pcnet,macaddr=00:aa:00:00:02:02 -net pcap,vlan=2,ifname=\Device\NPF_{2AA77C53-B558-4E7C-A377-E92BF9FAF1BB} -serial telnet::1234,server,nowait

MAKE SURE ALL THE MAC ADDRESSES AND Network ID's are unique!!!!!!

Commands to enter at Telnet

modprobe e100
ifconfig eth0 up
ifconfig eth1 up
ifconfig eth2 up
cd /mnt/disk0
./lina_monitor

Command to save config

copy run disk0:/.private/startup-config

If this post helped you, PLEASE take the time to +1 it.

Please be aware, all information is provided free, but it does cost me to have this site hosted, if I've helped you in any way, or saved you some time/cost please take time to make a donation.

If you have anything to add to an article, or have an article you would like us to publish please feel free to contact PeteNetLive. (Please be aware I get a LOT of email, I cannot assist and fix everyone's problems, please do not be offended if you do not get a response).